Product Description
Decoiler Machine
Specification:
1. Diameter: 450mm~520mm
2. Max out diameter of the coil: 1300mm
3. Expansion: Hydraulic expansion, with 4 palms
4. Heads rotating: Hydraulic
5. Capacity: Max 5000/10000kgs per mandrel for each
6. Max Coil Width: 1220mm
7. Brake: Air brake
8. Safety cover for control box
9. Sensor: Air press arm sensor device
Installation of the machine:
The individual components of the machine are installed according to the layout and prepared for the commissioning.
Delivery extent does not comprise of:
- Media supply (electrics, compressed air, etc. )to the machine(control cabinet)
- Raw material, process material and fuels
- Raw material for test blocks
- Transport and lifting devices
- Auxiliary staff.
The operators of the plant should be present during the installation in order to become familiar with the new machines.
Commissioning of the machine:
The components of the machine are commissioned one after the other. At the end of the commissioning the machine is ready for production and is handed over.
The operators of the plant should be present during the commissioning in order to become familiar with the new machines.
Specification:
1. Diameter: 450mm~520mm
2. Max out diameter of the coil: 1300mm
3. Expansion: Hydraulic expansion, with 4 palms
4. Heads rotating: Hydraulic
5. Capacity: Max 5000/10000kgs per mandrel for each
6. Max Coil Width: 1220mm
7. Brake: Air brake
8. Safety cover for control box
9. Sensor: Air press arm sensor device
Installation of the machine:
The individual components of the machine are installed according to the layout and prepared for the commissioning.
Delivery extent does not comprise of:
- Media supply (electrics, compressed air, etc. )to the machine(control cabinet)
- Raw material, process material and fuels
- Raw material for test blocks
- Transport and lifting devices
- Auxiliary staff.
The operators of the plant should be present during the installation in order to become familiar with the new machines.
Commissioning of the machine:
The components of the machine are commissioned one after the other. At the end of the commissioning the machine is ready for production and is handed over.
The operators of the plant should be present during the commissioning in order to become familiar with the new machines.
Number | Items | Unit\Type | RF-HU |
1 | Capacity of move dolly | Ton | 5 |
2 | Speed | m/min | 5 |
3 | Lifting | mm | 550 |
4 | Moving | mm | 3000 |
5 | Hydraulic pressure | Mpa | 16 |
6 | Main Motor Power | Kw | 10 |
7 | Air press | Mpa | 0.9 |
8 | Capacity of uncoiler | Ton | 10 |
9 | Coil width mm | Max 1500 |